P213S - Glass Cloth

Permacel

E-Mail this datasheet

ADHESIVE TAPE FEATURES

Backing Material: Glass cloth

ADHESIVE TAPE ADVANTAGES

Extremely conformable
Boasts exceptional stability and retention of properties at Class 155°C temperatures
Minimal out-gassing under high vacuum conditions after thermosetting makes the product ideal for use in outer space applications
Offers excellent Freon resistance after thermoset

ADHESIVE TAPE APPLICATIONS

Designed for holding coil leads and anchoring terminal boards for insulating coil connections and coil ends.

ADHESIVE TAPE MARKETS SERVED

Electronics

ADHESIVE TAPE COLORS

GENERAL INFORMATION

P213S is a new "softer cloth" version of the P213 for better conformability. Designed for holding coil leads and anchoring terminal boards for insulating coil connections and coil ends. Well-suited for slot cell edge taping, making motor lead and internal connections and cable harness wrapping. Highly recommended for general purpose insulating and holding applications involving heavy gage wire.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Fiberglass	7.00
Adhesive (unwind)	Acrylic (thermosetting)
Thickness (total)		7.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	45.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	150.00 lbs/in

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Insulation Class	155.00°C
Dielectric Strength	3000.00 volts

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.