P262 - Flatback Nomex Non-Woven Electrical Insulating

Permacel

E-Mail this datasheet

FEATURES

Aggressive high tack
High adhesion
Flame retardant acrylic adhesive
Dielectric strength 3000 volts
Flamability rating 8%
UL component recog.: Guide OANZ2, File E20392

ADVANTAGES

High thermal rating
Flame retardancy
Thin backing provides adequate dielectric for 600 volt devices, with minimum insulation build-up where space is premium
Exceptional thermal endurance
Works well in automated machine dispensing and application equipment

APPLICATIONS

An outstanding tape for holding and insulating functions
Widely used to hold non-adhesive ground, barrier and layer insulation in place
To anchor winding starts and ends
To hold edge turns in place
To repair insulation on Nomex-wrapped conducters at splices and terminations
Act as coil end insulation on small stick wound coils

MARKETS SERVED

Home entertainment Mfg
Telecommunications
Electronics
Appliance & Motor mfg

COLORS

Natural

GENERAL INFORMATION

P262 is a 3.5 mil, electrical insulating tape. It is a flatback Nomex(R) backing with an acrylic thermoset adhesive that is flame retardant and solvent resistant. Unique among insulating tapes: high thermal rating and flame retardancy, along with thinness. An outstanding tape for holding and insulating functions. Widely used to hold non-adhesive ground, barrier and layer insulation in place; to anchor winding starts and ends; to hold edge turns in place; to repair insulation on Nomex-wrapped conducters at splices and terminations; and, as coil end insulation on small stick wound coils. In small motors, P262 is valued for insulating connections, bundling end turns and in multiple layers as ground insulation for small field coils. Also recommended for use in components for home entertainment and telecommunications where flame retardancy is essential.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Flatback Paper	3.50
Adhesive (unwind)	Acrylic (thermosetting)
Thickness (total)		3.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	40.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	27.00 lbs/in
Elongation Percent	8.00%

SECONDARY PHYSICAL PROPERTIES

Solvent Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Flame Resistant	Yes

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.