03000-065B - Black & White Polyethylene Masking Tape

Main Tape

E-Mail this datasheet

FEATURES

Std Roll Length: 500.00 yards
Available Widths:
30", 36", 42", 48", & 60"
Custom widths to 96" and lengths to 6000'
Films are printable, allowing for corporate logos, user instructions and inventory control
Adhesion to steel=4.5-9.2oz./in.
Unwind Adhesion=.5-1.0oz./in. (ASTM D3330/B)
Tensile Strength: MD=3800PSI, TD=2500PSI(ASTM D882)
Elongation: MD=360%, TD=540%
Low density
Two layer black & white coextruded polyethylene

ADVANTAGES

Clear film permits surface inspection without removal
Can be hand or machine applied
Acrylic adhesives will adhere to a variety of substrates and remove cleanly
Prevents scratching & marring
Prevents extra clean up due to over-spray
Reduces the need for costly rework & eliminates rejects
Medium density film cuts cleanly & resists edge curl

APPLICATIONS

Ideal on painted metal: Matt, textured & embossed
Protects Dry polished stainless steel
Cultured marble protection such as sinks, & spas
Nameplate protection

MARKETS SERVED

Appliances
Marine
Automotive
Truck & trailer
Industrial
Trim
Tubs, sinks & spas

COLORS

Black
White

GENERAL INFORMATION

03000-065B is a 4 mil, polyethylene film tape, coextruded, with white one the linerside and black on the unwind side. It is used for surface protection.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PP - Polypropylene	4.00
Adhesive (unwind)	Acrylic
Thickness (total)		4.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	4.50 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Elongation Percent	360.00%
Testing Info: Elongation: ASTM D-882, Adhesion to Steel: D3330/A

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
UV Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.