FEATURES
- Available Widths:
- 30", 36", 42", 48", & 60"
- Custom widths to 96" and lengths to 6000'
- Films are printable, allowing for corporate logos, user instructions and inventory control
- Adhesion to steel=1.5-3.0oz./in.
- Unwind Adhesion=.5-1.0oz./in. (ASTM D3330/B)
- Tensile Strength: MD=3800PSI, TD=2500PSI(ASTM D882)
- Elongation: MD=675%, TD=550%
- Low density
ADVANTAGES
- Clear film permits surface inspection without removal.
- Substrates protected by tinted film may be easily grouped according to color, thus aiding in inventory control
- Can be hand or machine applied
- Acrylic adhesives will adhere to a variety of substrates and remove cleanly
- Prevents scratching & marring
- Prevents extra clean up due to over-spray
- Reduces the need for costly rework & eliminating rejects
- Medium density film cuts cleanly & resists edge curl
APPLICATIONS
- Ideal on low gloss & embossed painted metal
- Bright annealed, buff mat, mill finish stainless steel
- Brass
MARKETS SERVED
- Appliances
- Marine
- Automotive
- Truck & trailer
- Industrial
- Furniture
- Trim
COLORS
|
 |
GENERAL INFORMATION
| 03000-028B is a 3 mil, black on the inside, white on the outside, polyethylene film. It is used for surface protection of anodized aluminum, painted metal, stainless steel and nameplates. |
|
| PRODUCT CONSTRUCTION |
| |
Type |
Mil Thickness |
|
 |
| Backing |
PE - Polyethylene |
3.00 |
| Adhesive (unwind) |
Acrylic (water based) |
|
| Thickness (total) |
|
3.00 |
|
|
| PRIMARY PHYSICAL PROPERTIES |
| |
Unwind Side |
|
Liner Side |
|
|
| Adhesion-to-Steel - 180° Peel |
1.50 oz/in |
|
|
| Adhesive Removable |
Yes |
|
|
| Adhesive Clean Removable |
Yes |
|
|
| Adhesive Repositionable |
Yes |
|
|
| Adhesive Activation |
Pressure |
|
|
| Elongation Percent |
675.00% |
|
|
Testing Info: Elongation: ASTM D-882, Adhesion to Steel: D3330/A |
|
|
| SECONDARY PHYSICAL
PROPERTIES |
|
|
|
| THERMAL / ELECTRICAL
PROPERTIES |
| Minimum Application Temperature |
40°F |
| Minimum Service Temperature |
0°F |
|
|
|