|
|
ADHESIVE TAPE FEATURES
- Std Roll Length: 500.00 yards
- Available Widths:
- 30", 36", 42", 48", & 60"
- Custom widths to 96" and lengths to 6000'
- Films are printable, allowing for corporate logos, user instructions and inventory control
- Adhesion to steel=2-7oz./in.
- Unwind Adhesion=.5-1.0oz./in. (ASTM D3330/B)
- Tensile Strength: MD=3300PSI, TD=2700PSI(ASTM D882)
- Elongation: MD=360%, TD=540%
- Low density
ADHESIVE TAPE ADVANTAGES
- Clear film permits surface inspection without removal.
- Substrates protected by tinted film may be easily grouped according to color, thus aiding in inventory control
- Can be hand or machine applied
- Acrylic adhesives will adhere to a variety of substrates and remove cleanly
- Prevents scratching & marring
- Prevents extra clean up due to over-spray
- Reduces the need for costly rework & eliminating rejects
- Medium density film cuts cleanly & resists edge curl
ADHESIVE TAPE APPLICATIONS
- Ideal on semi and low gloss painted metal
- Wet and dry polished stainless steel
- Anodized aluminum
ADHESIVE TAPE MARKETS SERVED
- Appliances
- Marine
- Automotive
- Truck & trailer
- Industrial
- Furniture
- Trim
ADHESIVE TAPE COLORS
|
 |
GENERAL INFORMATION
| 03001-048W is a 3 mil, low density, polyethylene film with a chemically stable water based acrylic adhesive. A medium tack performance masking tape, primarily for surface protection of anodized aluminum, semi and low gloss painted metal, dry and wet stainless steel. |
|
| PRODUCT CONSTRUCTION |
| |
Type |
Mil Thickness |
|
 |
| Backing |
PE - Polyethylene |
3.00 |
| Adhesive (unwind) |
Acrylic |
|
| Thickness (total) |
|
3.00 |
|
|
| PRIMARY PHYSICAL PROPERTIES |
| |
Unwind Side |
|
Liner Side |
|
|
| Adhesion-to-Steel - 180° Peel |
2.00 oz/in |
|
|
| Adhesive Removable |
Yes |
|
|
| Adhesive Clean Removable |
Yes |
|
|
| Adhesive Repositionable |
Yes |
|
|
| Adhesive Activation |
Pressure |
|
|
| Elongation Percent |
360.00% |
|
|
Testing Info: Elongation: ASTM D-882, Adhesion to Steel: D3330/A |
|
|
| SECONDARY PHYSICAL
PROPERTIES |
|
|
|
| THERMAL / ELECTRICAL
PROPERTIES |
| Minimum Application Temperature |
40°F |
| Minimum Service Temperature |
0°F |
|
|
Adhesive Tape and Foam Converting Services
|
|
| |
- The physical properties listed are typical values and are not to
be considered as specifications. Our suggestions for use are based
on
tests we believe to be reliable. However, the purchaser must carry
out their own tests to determine the suitability of the product for
their internal use. Information is given in good faith, but without
warranty.
- It is essential, as with all pressure-sensitive tapes, that the surface
to which the tape is applied be clean, dry and free of grease and oil.
- Shelf life from date of manufacture is based on the product being
stored at 70°F(21°C) / 50% relative humidity out of direct
sunlight.
- Specification compliance is dynamic and should only be used as a general
guide. Always confirm that the tape you are interested in currently complies
with all specification requirements. Please verify that the product number
that you select is available in the proper size and color to meet your
specification.
|
 
|
|