IC6187 - Black Grit Safety Tread

MACtac Inc.

E-Mail this datasheet
Request a quote

ADHESIVE TAPE FEATURES

Quick Tack = 5.0 #/sq. in.
Shear hours to failure is 100+
Backing is a non-tearing plastic film

ADHESIVE TAPE ADVANTAGES

ADHESIVE TAPE APPLICATIONS

ADHESIVE TAPE MARKETS SERVED

ADHESIVE TAPE COLORS

GENERAL INFORMATION

IC6187 consists of a finely ground mineral abrasive permanently bonded to one side of a high-strength, non-tearing, 20 mil, plastic carrier film with an adhesive on the opposite side. The permanent pressure sensitive adhesive is protected with a kraft pape release liner. IC6187 provides a low profile, non-slip material for interior/exterior surfaces such as shop floors, stairs, loading ramps, ladders, recreational vehicles, diving boards, skateboards, etc. The adhesive provides instant secure bonding with no lifting even in high-traffic areas.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Liner Type (outer)	Paper (silicone)
Thickness (total)		20.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	40.00 oz/in

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	20°F
Maximum Short-Term Temperature	150°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.