IM2920 - Double Coated Polyethylene Foam

MACtac Inc.

E-Mail this datasheet
Request a quote

ADHESIVE TAPE FEATURES

Shear is 300+ hours to failure

ADHESIVE TAPE ADVANTAGES

High performance, modified acrylic adhesive
Provides excellent temperature properties
Excellent holding power
Excellent chemical resistance

ADHESIVE TAPE APPLICATIONS

Aids in the joining of uneven or irregular surfaces

ADHESIVE TAPE MARKETS SERVED

ADHESIVE TAPE COLORS

GENERAL INFORMATION

IM2920 is a 36 mil, or 1/32inch white, closed cell polyethylene foam coated on both sides with a high performance, modified acrylic adhesive. It provides the excellent temperature properties, holding power and chemical resistance exhibited by acrylic adhesives plus the strength of a cross-linked polyethylene foam. The 1/32" foam carrier offers a gap-filling function that aids in the joining of uneven or irregular surfaces.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PE - Polyethylene
Adhesive (unwind)	Acrylic
Adhesive (liner)	Acrylic
Liner Type (outer)	Paper (60# densified, semi-bleached kraft)
Foam Cell Type	Closed
Thickness (total)		36.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	136.00 oz/in	128.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	6.00 lbs/in
Elongation Percent	400.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
Chemical Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	200°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.