IB2405 - Double Coated Latex Paper

MACtac Inc.

E-Mail this datasheet

FEATURES

Quick Tack is 4.3 unwind & 4.0 liner #/sq.in.
Shear is 300+ hours to failure
Available with a 2 mil PET liner as IB2405P2
Available double linered with 90# polycoated liners as IB2408RXL

ADVANTAGES

A high performance, acrylic adhesive
Offers improved performance at elevated temperatures

APPLICATIONS

Designed to bond most plastic and metal faceplates, nameplates, logos and other components
The black paper carrier provides the opaque block-out characterisitcs required in many applications

MARKETS SERVED

Home electronic industry

COLORS

Black

GENERAL INFORMATION

MACbond IB2405 is a 7.8 mil, latex impregnated black paper that is coated on each side with a high performance, acrylic adhesive. It was designed to bond most plastic and metal faceplates, nameplates, logos and other components in the home electronic industry. The black paper carrier provides the opaque block-out characterisitcs required in many applications. The acrylic adhesive offers improved performance at elevated temperatures.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Flatback Paper
Adhesive (unwind)	Acrylic
Adhesive (liner)	Acrylic
Liner Type (outer)	Paper ( semi-bleached kraft)
Thickness (total)		7.80

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	25.20 oz/in	72.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	13.00 lbs/in
Elongation Percent	8.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	225°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.