IB1112 - Double Coated PET Tape

MACtac Inc.

E-Mail this datasheet

FEATURES

Quick Tack is 10.0 #/sq.in.
Shear hours to failure are 300+
Resistant to water, detergent and alcohol, aliphatic and some aromatic hydrocarbons
Not recommended for use in contact with solvents such as ketones, esters and some chlorinated hydrocarbons.

ADVANTAGES

Aggressive, rubber based adhesive

APPLICATIONS

Used extensively for the mounting and bonding of flexible magnetic materials
Specially designed with a tighter than normal release in order to permit processing small cut parts without the liner removing from the adhesive prematurely

MARKETS SERVED

COLORS

GENERAL INFORMATION

IB-1112 consists of a thin polyester film carrier coated on both sides with an aggressive, rubber based pressure sensitive adhesive. The product is supplied self-wound on a densified, semi-bleached kraft release liner. IB-1112 is used extensively for the mounting and bonding of flexible magnetic materials. This product construction has been specially designed with a tighter than normal release in order to permit processing small cut parts without the liner removing from the adhesive prematurely.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester
Adhesive (unwind)	Rubber
Adhesive (liner)	Rubber
Liner Type (outer)	Paper (semi bleached Kraft)
Thickness (total)		3.70

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesive Activation	Pressure
Tensile Strength	9.50 lbs/in
Elongation Percent	100.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	150°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.