IB1101 - Double Coated PET Tape

MACtac Inc.

E-Mail this datasheet

FEATURES

Quick Tack is 10.0 #/sq.in.
Shear hours to failure are 300+
Resistant to water, detergent and alcohol, aliphatic and some aromatic hydrocarbons
Not recommended for use in contact with solvents such as ketones, esters and some chlorinated hydrocarbons.

ADVANTAGES

APPLICATIONS

MARKETS SERVED

COLORS

GENERAL INFORMATION

IB-1101 consists of a polyester film coated on both sides with a high performance, rubber based pressure sensitive adhesive. The product is supplied self-wound on a polycoated natural kraft release liner. IB-1101 exhibits outstanding shear resistance and high adhesion. The extra thick (1 mil) polyester carrier provides added strength and stability for optimum processing and handling.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester
Adhesive (unwind)	Rubber
Adhesive (liner)	Rubber
Liner Type (outer)	Paper ( natural kraft)
Thickness (total)		4.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	72.00 oz/in	152.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	20.00 lbs/in
Elongation Percent	100.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	150°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.