IB2107 - Double Coated PET Tape

MACtac Inc.

E-Mail this datasheet

FEATURES

Quick Tack is 4.0 #/sq.in.
Shear hours to failure are 300+
Resistant to water, detergent and alcohol, aliphatic and some aromatic hydrocarbons
Not recommended for use in contact with solvents such as ketones, esters and some chlorinated hydrocarbons

ADVANTAGES

The adhesive offers good clarity
Has excellent resistance to UV light exposure
The carrier provides excellent dimensional stablity & die cutting properties

APPLICATIONS

MARKETS SERVED

COLORS

GENERAL INFORMATION

IB2107 consists of a thin polyester film coated on both sides with a high performance acrylic. It is typically used for industrial bonding where outstanding adhesion, high shear & good solvent resistance are required.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester
Adhesive (unwind)	Acrylic
Adhesive (liner)	Acrylic
Liner Type (outer)	Paper (white kraft)
Liner Type (inner)	Paper (white kraft)
Thickness (total)		5.20

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 90° Peel	4.00 oz/in	4.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	10.00 lbs/in
Elongation Percent	100.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
UV Resistant	Yes
Solvent Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	250°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.