IB2154 - Double Coated HDPE Film

MACtac Inc.

E-Mail this datasheet

FEATURES

Quick Tack is 5.0 #/sq.in.
Shear hours to failure are 300+
Resistant to water, detergent and alcohol, aliphatic and some aromatic hydrocarbons
Not recommended for use in contact with solvents such as ketones, esters and some chlorinated hydrocarbons.

ADVANTAGES

High-tack, modified-acrylic
Bonds well to range of materials, including many plastics

APPLICATIONS

Provides the temperature resistance required in many automotive, appliance and other applications without sacrificing adhesion
Originally developed for use in exterior automotive mirror-mounting applications.

MARKETS SERVED

Automotive
Appliance

COLORS

GENERAL INFORMATION

IB-2154 consists of a 4 mil Black HDPE film coated on both sides with high-tack, modified-acrylic pressure sensitive adhesive (PSA). The product is supplied in self-wound form on a bleached, 74# PE-coated Kraft release liner. The modified-acrylic adhesive bonds well to range of materials, including many plastics. IB-2154 provides the temperature resistance required in many automotive, appliance and other applications without sacrificing adhesion. IB-2154 was originally developed for use in exterior automotive mirror-mounting applications.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PE - Polyethylene	4.00
Adhesive (unwind)	Acrylic	2.00
Adhesive (liner)	Acrylic	2.00
Liner Type (outer)	Paper ( 74# PE-coated Kraft)
Thickness (total)		8.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 90° Peel	5.50 oz/in	5.50 oz/in
Adhesive Activation	Pressure
Tensile Strength	30.00 lbs/in
Elongation Percent	75.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	-40°F
Maximum Short-Term Temperature	200°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.