IB2151 - Double Coated PET

MACtac Inc.

E-Mail this datasheet

FEATURES

Quick Tack is 6.0/4.0 #/sq.in.
Shear hours to failure are 300+
Resistant to water, detergent and alcohol, aliphatic and some aromatic hydrocarbons
Not recommended for use in contact with solvents such as ketones, esters and some chlorinated hydrocarbons.

ADVANTAGES

Thin polyester film coated on both sides with an high tack, modified acrylic
Provides the temperature resistance required by many automotive and appliance applications without sacrificing peel and tack adhesion
Designed with extra adhesive on the “Unwind” side to provide maximum adhesion to rough or porous surfaces
The polyester carrier provides excellent dimensional stability and die cutting properties

APPLICATIONS

Bonds to a wide range of materials, including most plastics.

MARKETS SERVED

Automotive
Appliance

COLORS

GENERAL INFORMATION

IB-2151/IB-2156 consists of a thin polyester film coated on both sides with an high tack, modified acrylic pressure sensitive adhesive. The product is supplied self-wound on a 60# densified kraft release liner. The unique acrylic adhesive bonds to a wide range of materials, including most plastics. IB-2151/IB2156 provides the temperature resistance required by many automotive and appliance applications without sacrificing peel and tack adhesion. IB-2151/2156 has been designed with extra adhesive on the “Unwind” side to provide maximum adhesion to rough or porous surfaces. The polyester carrier provides excellent dimensional stability and die cutting properties.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester
Adhesive (unwind)	Acrylic (modified)
Adhesive (liner)	Acrylic (modified)
Thickness (total)		4.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 90° Peel	4.50 oz/in	3.50 oz/in
Adhesive Activation	Pressure
Tensile Strength	10.00 lbs/in
Elongation Percent	100.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	250°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.