IB2131 - Double Coated PET Tape

MACtac Inc.

E-Mail this datasheet

ADHESIVE TAPE FEATURES

Resistant to water, detergent and alcohol, aliphatic and some aromatic hydrocarbons
Not recommended for use in contact with solvents such as ketones, esters and some chlorinated hydrocarbons

ADHESIVE TAPE ADVANTAGES

The polyester carrier provides excellent dimensional stability and die cutting properties

ADHESIVE TAPE APPLICATIONS

Bonds to a wide range of materials, including most plastics and foams
Provides the temperature resistance required by many automotive and appliance applications without sacrificing peel and tack adhesion

ADHESIVE TAPE MARKETS SERVED

ADHESIVE TAPE COLORS

GENERAL INFORMATION

IB-2131 consists of a thin polyester film coated on both sides with a high tack, modified acrylic pressure sensitive adhesive. The product is supplied self-wound on a 60# densified kraft liner. IB-2131 is 54” wide and IB2136 is 60” wide. The unique acrylic adhesive bonds to a wide range of materials, including most plastics and foams. IB-2131 provides the temperature resistance required by many automotive and appliance applications without sacrificing peel and tack adhesion. The polyester carrier provides excellent dimensional stability and die cutting properties.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester
Adhesive (unwind)	Acrylic
Adhesive (liner)	Acrylic
Thickness (total)		3.70

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	4.50 oz/in	4.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	10.00 lbs/in
Elongation Percent	100.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	250°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.