FEATURES
- Quick Tack is 6.0 #/sq. in.
- Static Shear is 15+ hours to failure on the Unwind saide & 300+ for the rubber
- Not recommended for use in contact with aliphatic or aromatic
hydrocarbons
- Polyester film coated on one side with an aggressive, modified acrylic
pressure- sensitive adhesive and on the opposite side with high-performance, rubber-resin pressure sensitive adhesive
- Available as IB2125L12 with a 12 pt board liner
ADVANTAGES
- Resistant to water, detergent, and alcohol
- The “unwind side” modified-acrylic PSA provides excellent adhesion and compatibility with a wide range of foam, sponge, rubber, cork and other gasket materials
- The “liner side” rubber-based PSA provides excellent adhesive performance on many end-use substrates with exposure to demanding application conditions
- The polyester carrier provides dimensional stability and superior die cutting properties
APPLICATIONS
- Provides a good combination of
lamination, die-cutting & end-use application performance
-
MARKETS SERVED
COLORS
|
 |
GENERAL INFORMATION
| IB2125 consists of a thin 3.5 mil, polyester film coated on one side with an aggressive, modified acrylic
pressure- sensitive adhesive and on the opposite side with high-performance, rubber-resin pressure sensitive adhesive. IB-2125 utilizes an 80# SCK release liner that provides a good combination of
lamination, die-cutting & end-use application performance.
The “unwind side” modified-acrylic PSA provides excellent adhesion and compatibility with a wide range of foam, sponge, rubber, cork and other gasket materials. The “liner side” rubber-based PSA provides excellent adhesive performance on many end-use substrates with exposure to demanding application conditions. The polyester carrier provides dimensional stability and superior die cutting properties. |
|
| PRODUCT CONSTRUCTION |
| |
Type |
Mil Thickness |
|
 |
| Backing |
PET - Polyester |
|
| Adhesive (unwind) |
Acrylic |
|
| Adhesive (liner) |
Rubber |
|
| Liner Type (outer) |
80# SCK release liner |
|
| Thickness (total) |
|
3.50 |
|
|
| PRIMARY PHYSICAL PROPERTIES |
| |
Unwind Side |
|
Liner Side |
|
|
| Adhesion-to-Steel - 180° Peel |
128.00 oz/in |
|
176.00 oz/in |
| Adhesive Activation |
Pressure |
|
|
| Tensile Strength |
10.00 lbs/in |
|
|
| Elongation Percent |
100.00% |
|
|
|
|
| SECONDARY PHYSICAL
PROPERTIES |
|
|
|
| THERMAL / ELECTRICAL
PROPERTIES |
| Minimum Application Temperature |
50°F |
| Minimum Service Temperature |
0°F |
| Maximum Short-Term Temperature |
160°F |
|
|
|