IB1175ER - Double Coated Polyester Tape

MACtac Inc.

E-Mail this datasheet

FEATURES

Quick Tack 7.5#/sq.in. to Stainless steel
Shear strength is 300+ hours to failure

ADVANTAGES

Aggressive

APPLICATIONS

General purpose bonding of gasket, seal & trim
Used for bonding foams, felts, cloths, primed wood, paper, metal, plastics,unplasticized substrates

MARKETS SERVED

COLORS

GENERAL INFORMATION

IB1175ER consists of a thin polyester film coated on both sides with an aggressive, general purpose rubber based adhesive. It was designed for general purpose bonding applications such as in the gasket, seal and trim markets. Typically used for bonding to foams, felts, primed wood, paper, metal, plastics and most low or unplasticized substrates. It has an excellent balance of economy versus performance. The polyester carrier provides dimensional stability and superior die cutting properties.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester	0.50
Adhesive (unwind)	Rubber	0.00
Adhesive (liner)	Rubber	0.00
Liner Type (outer)	Paper (densified, semi bleached kraft)
Thickness (total)		3.40

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	144.00 oz/in	144.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	10.00 lbs/in
Elongation Percent	100.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	150°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.