IF3032 - High Performance Adhesive Transfer Tape

MACtac Inc.

E-Mail this datasheet

ADHESIVE TAPE FEATURES

Quick Tack is 2.0#/sq.in.
Shear strength 30+ hours to failure (1000g/sq.in.@72°F)

ADHESIVE TAPE ADVANTAGES

Economical
Resistant to water, detergent, alcohol, aliphatic and some aromatic hydrocarbons

ADHESIVE TAPE APPLICATIONS

General purpose bonding

ADHESIVE TAPE MARKETS SERVED

ADHESIVE TAPE COLORS

GENERAL INFORMATION

IF3032 is a 2 mil thick free-film of acrylic pressure-sensitive adhesive. IF3032 represents an economical solution to many general-purpose bonding applications where a non-reinforced film of acrylic adhesive is required. The 2 mil adhesive helps maintain a low-profile appearance on bonded assemblies and provides good adhesion to a variety of substrates. The adhesive is protected by a two-side, release-treated, 80# kraft paper liner.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic	2.00
Liner Type (outer)	Paper (kraft)
Thickness (total)		2.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	32.00 oz/in	32.00 oz/in
Adhesive Activation	Pressure

SECONDARY PHYSICAL PROPERTIES

Water Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	-20°F
Maximum Short-Term Temperature	170°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.