IF2012 - Adhesive Transfer Tape

MACtac Inc.

E-Mail this datasheet

FEATURES

Quick tack is 4.0 #/sq.in.
Shear to Stainless Steel is 300+ hours to fail when loaded with 1000 g/sq.in.@72°F

ADVANTAGES

Resistant to water, detergent, alcohol, aliphatic and some aromatic hydrocarbons
Aggressive tack
High shear strength for quick bonding & long term holding power
The adhesive has exellent ultra violet light stability and elevated temperature resistance

APPLICATIONS

This thin adhesive enables nameplates and faceplates to maintain their low profile appearance

MARKETS SERVED

COLORS

GENERAL INFORMATION

IF2012 is a 2 mil thick, high performance, acrylic transfer adhesive. It provides aggressive tack and high shear strength for quick bonding & long term holding power. The adhesive has exellent ultra violet light stability and elevated temperature resistance. This thin adhesive enables nameplates and faceplates to maintain their low profile appearance.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic	2.00
Liner Type (outer)	Paper (kraft)
Thickness (total)		2.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	65.60 oz/in	65.60 oz/in
Adhesive Activation	Pressure

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	-40°F
Maximum Short-Term Temperature	250°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.