IB1250TR - High Tack/Removable Double Coated Film Tape

MACtac Inc.

E-Mail this datasheet

FEATURES

Std Roll Length: 250.00 yards
Differencial adhesive on either side of carrier
Quick tack is 10 unwind & 0.5 liner #/sq.in
Shear is 300+ hours to failure

ADVANTAGES

Tensile strength is 22 unwind & 36 liner side #/in
Elongation 270% unwind & 80% liner

APPLICATIONS

Permits the production of removable or repositionable products such as gaskets, protective pads and other temporarily bonded items

MARKETS SERVED

COLORS

Clear

GENERAL INFORMATION

IB 1250TR consists of a 1 mil, carrier film coated on both sides with different adhesive strengths. The unwind side is an aggressive, general purpose, permanent adhesive. The liner side utilizes a low adhesion, removable formulation. It was designed for laminating permanently to the initial substrate. The second or final bond would provide removable adhesion from most substrates. This construction permits the production of removable or repositionable products such as gaskets, protective pads and other temporarily bonded items.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PP - Polypropylene	1.00
Adhesive (unwind)	Rubber	0.70
Adhesive (liner)	Acrylic	1.40
Liner Type (outer)	Ppaer (80# white SCK)
Thickness (total)		3.10

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	128.00 oz/in	6.40 oz/in
Adhesive Clean Removable	No	Yes
Adhesive Repositionable	No	Yes
Adhesive Activation	Pressure
Tensile Strength	22.00 lbs/in

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	150°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.