FEATURES
- Std Roll Length: 250.00 yards
- Shear is 300+ hours to failure
- Quick tack is 12.5 unwind & 10.5 liner #/sq.in.
ADVANTAGES
- Aggressive, general purpose, rubber based adhesive
- Excellent balance of economy versus performance
- Polyester carrier provides dimensional stability and superior die cutting properties
APPLICATIONS
- Designed for general purpose bonding applications such as in the gasket, seal and trim markets
- Typically used for bonding to foams, felts, cloths, primed wood, paper, metal, plastics and most low or unplasticized substrates
MARKETS SERVED
COLORS
|
 |
GENERAL INFORMATION
| MACbond IB1192 consists of a 3.4 mil, this polyester film coated on both sides with an aggressive, general purpose, rubber based adhesive. The product was designed for general purpose bonding applications such as in the gasket, seal and trim markets. Typically used for bonding to foams, felts, cloths, primed wood, paper, metal, plastics and most low or unplasticized substrates. It has an excellent balance of economy versus performance. The polyester carrier provides dimensional stability and superior die cutting properties. |
|
| PRODUCT CONSTRUCTION |
| |
Type |
Mil Thickness |
|
 |
| Backing |
PET - Polyester |
0.50 |
| Adhesive (unwind) |
Rubber |
|
| Adhesive (liner) |
Rubber |
|
| Liner Type (outer) |
Paper (densified, semi-bleached kraft) |
|
| Thickness (total) |
|
3.40 |
|
|
| PRIMARY PHYSICAL PROPERTIES |
| |
Unwind Side |
|
Liner Side |
|
|
| Adhesion-to-Steel - 180° Peel |
152.00 oz/in |
|
136.00 oz/in |
| Adhesive Activation |
Pressure |
|
|
| Tensile Strength |
10.00 lbs/in |
|
|
| Elongation Percent |
100.00% |
|
|
|
|
| SECONDARY PHYSICAL
PROPERTIES |
|
|
|
| THERMAL / ELECTRICAL
PROPERTIES |
| Minimum Application Temperature |
40°F |
| Minimum Service Temperature |
0°F |
| Maximum Short-Term Temperature |
150°F |
|
|
|