IB1184 - Double Coated Temperature Resistant Tape

MACtac Inc.

E-Mail this datasheet

FEATURES

Std Roll Length: 250.00 yards
Quick Tack is 14#/sq.in. to Stainless Steel
Shear hours to failure is 300+

ADVANTAGES

High performance adhesives

APPLICATIONS

Engineered for the most demanding bonding or laminating applications

MARKETS SERVED

COLORS

GENERAL INFORMATION

MACbond IB1184, a 5.7 mil, double-coated polyester film coated on both sides with a heavy coating of an aggressive, high performance, rubber based adhesive. It was desinged for the more demanding applications encountered in the gasket , seal & trim lamination markets where high tack and high ultimate bond strength are required. The heavy coating of adhesive aids in bonding rough or irregular surfaces. It is engineered for the most demanding bonding or laminating applications. These tapes feature general purpose or high performance rubber based adhesives, or high performance acrylic adhesives on polyester, polypropylene, tissue, or popular Blackbond or Clearbond carriers.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester	0.50
Adhesive (unwind)	Rubber	2.60
Adhesive (liner)	Rubber	2.60
Liner Type (outer)	SCK (80#, white)
Thickness (total)		5.70

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	224.00 oz/in	240.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	10.00 lbs/in
Elongation Percent	100.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	180°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.