IB2101 - Double Coated, .5 mil, Polyester

MACtac Inc.

E-Mail this datasheet

FEATURES

Quick Tack is 2.5 #/sq.in.
Shear Strength is 300+ hours to failure (1000g/sq.in.@72°F)

ADVANTAGES

Good adhesion
High shear
Good solvent resistance
Good clarity
Excellent resistance to U.V. light exposure
Excellent dimensional stability
Good die cutting properties
Resistant to detergent & alcohol, aliphatic & some aromatic hydrocarbons

APPLICATIONS

Best suited for bonding relatively smooth surfaces
Applications requiring a thin reinforced adhesive film

MARKETS SERVED

COLORS

GENERAL INFORMATION

IB2101 consists of a thin polyester film coated on both sides with a high performance acrylic based pressure sensitive adhesive. The product is supplied self-wound on a densified, semi-bleached kraft liner. IB2101 is typically used for industrial bonding applications where good adhesion, high shear and good solvent resistance are required. IB2101 is best suited for bonding relatively smooth surfaces and similar applications requiring a thin reinforced adhesive film. The acrylic adhesive offers good clarity and has excellent resistance to U.V. light exposure. The polyester carrier provides excellent dimensional stability and die cutting properties.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PET - Polyester
Adhesive (unwind)	Acrylic
Adhesive (liner)	Acrylic
Liner Type (outer)	Paper (kraft)
Thickness (total)		2.60

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	48.00 oz/in	48.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	10.00 lbs/in
Elongation Percent	90.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
UV Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	250°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.