582 - Surface Protection Tape

Intertape Polymer Corp.

E-Mail this datasheet

FEATURES

Specification Conformance: MIL-T-38727, Type II

ADVANTAGES

Low Tack
Proper balance of strength in the base sheet together with an ideal level of adhesion
Adhesive removes cleanly and easily from a variety of surfaces
"Machinable" (i.e. does not gum up drill bits, etc.).

APPLICATIONS

Used for protection of smooth, polished surfaces both finished goods andlor in-process

MARKETS SERVED

Mica dealers
Stainless Steel Mfg.
Laminators
Aluminum Extruders
Fibreglass running boards (campers and conversion vans)
Stencil "Pre-Spacing"
Furniture manufacturers

COLORS

GENERAL INFORMATION

582 is a 4.9 mil, low tack, flatback paper product designed for the proper balance of strength in the base sheet together with an ideal level of adhesion. Can also be used for protection of smooth, polished surfaces both finished goods and/or in-process. Natural rubber resin adhesive removes cleanly and easily from a variety of surfaces and is "machinable" (i.e. does not gum up drill bits, etc.). Used primarily by Mica dealers, Stainless Steel Mfg., Laminators, Aluminum Extruders, Fibreglass running boards (campers and conversion vans), Stencil "Pre-Spacing" and Furniture manufacturers

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Flatback Paper
Thickness (total)		4.90

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	12.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	17.00 lbs/in
Elongation Percent	3.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.