7150 - Film Packaging Tape

Intertape Polymer Corp.

E-Mail this datasheet

FEATURES

Complies with the Federal Food, Drug and Cosmetic Act, CFR Title 21, Subpart B, Par. 175.105, which covers the use of pressure-sensitive adhesives and tapes for 'indirect contact' food packaging, such as box sealing

ADVANTAGES

Manufactured with "hot melt"

APPLICATIONS

Extra production grade general purpose carton sealing
Offers safe attractive closure to a variety of corrugated and liner-board boxes

MARKETS SERVED

Industrial

COLORS

Blue
Green
Orange
Red
White
Yellow

GENERAL INFORMATION

7150 is a 1.95 mil, extra production grade, general purpose, polypropylene carton sealing tape, manufactured with "hot melt" adhesive, offering safe attractive closure to a variety of corrugated and liner-board boxes. Complies with the Federal Food, Drug and Cosmetic Act, CFR Title 21, Subpart B, Par. 175.105, which covers the use of pressure-sensitive adhesives and tapes for 'indirect contact' food packaging, such as box sealing.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	BOPP - Biaxially Oriented Polypropylene
Adhesive (unwind)	Rubber (Synthetic)
Thickness (total)		1.95

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	32.00 oz/in
Adhesive Activation	Heat
Tensile Strength	28.00 lbs/in
Elongation Percent	90.00%
Testing Info: ASTM D-3652 ASTM D-3330 ASTM D-3759 ASTM D-3759

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.