527 - General Purpose Masking Tape

Intertape Polymer Corp.

E-Mail this datasheet
Request a quote

ADHESIVE TAPE FEATURES

Std Roll Length: 60.00 yards
Quick stick to steel is 18 oz/in

ADHESIVE TAPE ADVANTAGES

Moisture resistant
Stain resistant adhesive
Withstands bake temperatures up to 265°F for one hour
Withstands exposure to ultra-violet (UV) light for up to (5) hours
Specially designed adhesive allows #527 to stick firmly and securely to most surfaces
Clean removable

ADHESIVE TAPE APPLICATIONS

Primarily used for spray painting aftermarket autos, boats, etc.
Wooden window manufacturing (temporary bonding)
Some PCB (printed circuit board)
Manufacturing, and any critical masking application requiring higher temperature resistance versus most general purpose masking tapes

ADHESIVE TAPE MARKETS SERVED

Automotive
Window mfg
Electronics

ADHESIVE TAPE COLORS

Natural

GENERAL INFORMATION

527 is a 6.1 mil, natural colored, moisture resistant, crepe paper tape, coated with a stain resistant natural / synthetic rubber pressure-sensitive adhesive capable of withstanding bake temperatures up to 265°F for one hour and/or exposure to ultra-violet (UV) light for up to (5) hours. The specially designed adhesive allows #527 to stick firmly and securely to most surfaces with clean removal. Primarily used for spray painting aftermarket autos, boats, etc., wooden window manufacturing (temporary bonding), some PCB (printed circuit board) manufacturing, and any critical masking application requiring higher temperature resistance versus most general purpose masking tapes.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Crepe Paper
Adhesive (unwind)	Rubber (Natural/Synthetic)
Thickness (total)		6.10

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	41.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	23.00 lbs/in
Elongation Percent	7.00%

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
UV Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	265°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.