PG8 - Paper Tape

Intertape Polymer Corp.

E-Mail this datasheet

FEATURES

Qucik stick to steel is 18oz/in

ADVANTAGES

Smooth crepe paper
Can be exposed to forced drying conditions for 30 minutes at 325°F with clean
Easy one piece removal after bake from a hot to warm surface
Special release coating provides an 'extra measure' of moisture and solvent resistance

APPLICATIONS

Especially suited for marine / fiberglass mold masking
Not recommended for outdoor exposure

MARKETS SERVED

COLORS

GENERAL INFORMATION

PG8 is a 7.6 mil, smooth crepe paper masking tape designed for narrow roll width applications to a variety of surfaces. Can be exposed to forced drying conditions for 30 minutes at 325°F with clean and easy one piece removal after bake from a hot to warm surface. Special release coating provides an 'extra measure' of moisture and solvent resistance. Especially suited for marine / fiberglass mould masking. Not recommended for outdoor exposure.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Crepe Paper
Adhesive (unwind)	Rubber (Natural)
Thickness (total)		7.60

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	34.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	24.00 lbs/in
Elongation Percent	6.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	325°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.