PM2 - Colored Paper Tape

Intertape Polymer Corp.

E-Mail this datasheet

FEATURES

Std roll length is 54 meters
Quick stick to steel is 25 oz/in

ADVANTAGES

Economical
Excellent adhesion
Performs well under a wide range of temperatures through a wide range of humidity conditions
Balance of high quick stick and excellent holding properties
Product is not repulpable.

APPLICATIONS

Carton sealing
Performs well as a low temperature splicing tape

MARKETS SERVED

COLORS

GENERAL INFORMATION

PM2 is a 6 mil, flatback tape used in carton sealing. A quick, sure sealing, economical, pressure-sensitive flatback tape which can increase packaging line efficiency. PM-2 offers a positive attractive seal and excellent adhesion to discourage pilfering. Performs well under a wide range of temperatures through a wide range of humidity conditions. Can be used on all types of cartons. Offers the advantages of a balance of high quick stick and excellent holding properties. Performs well as a low temperature splicing tape. Product is not repulpable.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Flatback Paper
Adhesive (unwind)	Rubber (natural)
Thickness (total)		6.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	57.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	37.00 lbs/in
Elongation Percent	4.00%
Testing Info: ASTM D6123, Type II; PPP-T-42C, Type II 0 C.I.D. A-A-883B Type II

SECONDARY PHYSICAL PROPERTIES

Solvent Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	225°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.