PF5 - Fluorescent Flatback Tape

Intertape Polymer Corp.

E-Mail this datasheet

FEATURES

Quick stick to steel is 10 oz/in

ADVANTAGES

Prints, perforates and die cuts with extreme ease
Printable with standard flexographic inks

APPLICATIONS

Ideal for shelf marking
Temporary safety marking

MARKETS SERVED

Industrial

COLORS

Fluorescent Orange
Fluorescent Red

GENERAL INFORMATION

PF5 is a 6.1 mil, medium strength flatback, packaging and identification tape. Prints, perforates and die cuts with extreme ease. Ideal for shelf marking and temporary safety marking. Printable with standard flexographic inks.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Flatback Paper
Adhesive (unwind)	Rubber
Thickness (total)		6.10

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	26.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	33.00 lbs/in
Elongation Percent	3.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	200°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.