PG56 - All Purpose Masking Tape

Intertape Polymer Corp.

E-Mail this datasheet

ADHESIVE TAPE FEATURES

Quick stick to steel is 17oz/in

ADHESIVE TAPE ADVANTAGES

Medium temperature capabilities
Can withstand exposure to forced drying conditions up to 250°F (120°C) for 30 minutes with warm to hot removal recommended
Excellent quick stick and holding
Special release coat provides a 'extra measure' of moisture and solvent resistance

ADHESIVE TAPE APPLICATIONS

Designed for applications requiring transfer resistance in conjunction with a variety of paints and surfaces

ADHESIVE TAPE MARKETS SERVED

ADHESIVE TAPE COLORS

Cream

GENERAL INFORMATION

PG56 is a 6.4 mil, superior grade, general industrial pressure-sensitive masking tape having medium temperature capabilities. PG-56 can withstand exposure to forced drying conditions up to 250°F (120°C) for 30 minutes with warm to hot removal recommended. Excellent quick stick and holding properties. Designed for applications requiring transfer resistance in conjunction with a variety of paints and surfaces. Special release coat provides a 'extra measure' of moisture and solvent resistance. Not recommended for outdoor exposure.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Crepe Paper
Adhesive (unwind)	Rubber
Thickness (total)		6.40

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	33.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	26.00 lbs/in
Elongation Percent	9.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	40°F
Maximum Short-Term Temperature	250°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.