PG5 - All Purpose Masking Tape

Intertape Polymer Corp.

E-Mail this datasheet

FEATURES

Quick stick to steel is 17oz/in
Gov spec is C.I.D. A-A-883B Type 1

ADVANTAGES

Smooth crepe
Offers an excellent balance of quick stick, panel adhesion and holding properties
Will support masking paper aprons at 160' F (70°C) for 30 minutes

APPLICATIONS

Most paint masking applications

MARKETS SERVED

COLORS

GENERAL INFORMATION

PG5 is a 6.3 mil, smooth crepe, pressure-sensitive masking tape. PG5 offers an excellent balance of quick stick, panel adhesion and holding properties. Recommended for most paint masking applications where excellent cornering with clean removal is desired. Will support masking paper aprons at 160' F (70°C) for 30 minutes. Not recommended for outdoor exposure.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Crepe Paper
Adhesive (unwind)	Rubber	6.30
Thickness (total)		Unknown

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	33.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	25.00 lbs/in
Elongation Percent	10.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	50°F
Maximum Short-Term Temperature	200°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.