519 - All Purpose Masking Tape

Intertape Polymer Corp.

E-Mail this datasheet

FEATURES

Std Roll Length: 60.00 yards
Federal Specifications PPP-T-42C, Type I
UU-T-106, Type I
C.I.D. A-A-883, Type I.

ADVANTAGES

Conformable
Flexible
Consistent conformability and tensile strength

APPLICATIONS

Other applications are interior paint masking
Spray painting (air-dry) autos
Boats (fibreglass)
Silk screening
Marble manufacturing (man-made)
Golf club shaft (build-up)
Carpet pad / pad splicing,
Freezer tape
For light bundling
Packaging
Splicing & tabbing

MARKETS SERVED

Marine
Automotive
Carpet

COLORS

Natural

GENERAL INFORMATION

519 is a 6 mil, conformable / flexible, high quality semi-bleached crepe paper, coated with natural / synthetic rubber pressure-sensitive adhesive capable of withstanding bake temperature up to 180°F (82°C) for up to one hour and/or exposure to ultra-violet I (UV) light for up to (5) hours. #519 offers consistent conformability and tensile strength for general purpose bundling, protecting, and various industrial applications. Product can be qualified to meet Federal Specifications PPP-T-42C, Type I and UU-T-106, Type I as well as C.I.D. A-A-883, Type I. Other applications are interior paint masking, spray painting (air-dry) autos, boats, etc., boat manufacturing (fibreglass), silk screening, mail rooms, marble manufacturing (man-made), golf club shaft (build-up), carpet pad / pad splicing, freezer tape, and for light bundling, packaging, splicing & tabbing.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Crepe Paper
Adhesive (unwind)	Rubber (Natural)
Thickness (total)		6.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	43.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	23.00 lbs/in
Elongation Percent	7.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.