PG511 - Kraft Paper Masking Tape

Intertape Polymer Corp.

E-Mail this datasheet

FEATURES

Meets C.I.D. A-A-883B, Type I.
Not recommended for outdoor exposure
Quick stick to steel 8.5oz/in

ADVANTAGES

Lightweight
It adheres to and removes cleanly
Smooth / controlled unwind
Thin profile for clean paint lines
Tears easily & cleanly without stretching
Resistant to mild chemicals, solvents, and water

APPLICATIONS

Designed with a transparency that permits visibility for packaging, reinforcing clips and combining containers
Interior paint masking (mild paints)
Drafting
Labeling and sealing
Mail rooms
Golf club shaft (build-up)
For Light-Duty Bundling
Packaging & Tabbing

MARKETS SERVED

COLORS

GENERAL INFORMATION

PG511 is a 5.0 mil, lightweight saturated crepe paper, coated with natural rubber pressure-sensitive adhesive. PG511 is designed primarily as an all-purpose product for non-critical applications. It adheres to and removes cleanly from a wide variety of surfaces. It has a smooth / controlled unwind. Thin profile for clean paint lines, tears easily & cleanly without stretching. Resistant to mild chemicals, solvents, and water. Meets C.I.D. A-A-883B, Type I. Not recommended for outdoor exposure. Other applications include: interior paint masking (mild paints), drafting, home workshop, butcher shop labeling and sealing, mail rooms, golf club shaft (build-up), for light-duty bundling, packaging & tabbing.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Crepe Paper
Adhesive (unwind)	Rubber (natural)
Thickness (total)		5.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	26.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	20.00 lbs/in
Elongation Percent	7.00%

SECONDARY PHYSICAL PROPERTIES

Hand Tearable

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	40°F
Maximum Short-Term Temperature	150°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.