9261 - Airframe Nylon Film

Ideal Tape Co. Inc.

E-Mail this datasheet

FEATURES

Propriety blend rubber adhesive

ADVANTAGES

Strong tear resistance
High temperature resistance
Conformable
No breaking or slivering
Only minimal residue

APPLICATIONS

Autoclave applications
Composite bonding

MARKETS SERVED

COLORS

Yellow

GENERAL INFORMATION

9261 is a 4 mil, strong, polyimide film designed to meet the temperature and pressure conditions of autoclave and composite bonding applications. It has a high temperature resistant, proprietary blended, rubber adhesive.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Polyimide	2.00
Adhesive (unwind)	Rubber (high temperature)	2.00
Thickness (total)		4.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	30.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	20.00 lbs/in
Elongation Percent	300.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.