8290 - Polyethylene Napthalate Tape

Ideal Tape Co. Inc.

E-Mail this datasheet

FEATURES

Polyethylene Napthalate backing

ADVANTAGES

High heat resistance
Excellent conformability
Leaves no residue upon removal

APPLICATIONS

Surface masking
Splicing

MARKETS SERVED

COLORS

Yellow

GENERAL INFORMATION

8290 is a 4.5 mil, polyethylene napthalate (PEN) film coated with a specially formulated high tack silicone adhesive. It is designed for both surface and splicing applications where high temperature resistance and conformability are required.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PE - Polyethylene	2.00
Adhesive (unwind)	Silicone	2.50
Thickness (total)		4.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	45.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	60.00 lbs/in
Elongation Percent	60.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.