428 - All Service Jacket Sealing Tape

Ideal Tape Co. Inc.

E-Mail this datasheet
Request a quote

ADHESIVE TAPE FEATURES

Std Roll Length: 50.00 yards

ADHESIVE TAPE ADVANTAGES

Strong adhesive & high tack
All weather adhesive provides a permanent lamination
Conformable
Pre-cut disks

ADHESIVE TAPE APPLICATIONS

Used for sealing cold and dual temperature duct & pipe systems where the basic insulation uses ASJ facing

ADHESIVE TAPE MARKETS SERVED

H.V.A.C.

ADHESIVE TAPE COLORS

White

GENERAL INFORMATION

428 AWF is a conformable foil/skrim/kraft lamination or all service jacket used for sealing cold and dual temperature duct & pipe systems where the basic insulation uses ASJ facing. The pre-cut discs are applied over washers and cupped pin heads or to repair accidental punctures in the facing. A high tack all weather formula adhesive provides a permanent lamination to the ASJ facing when application temperatures are between -25°F and +280°F.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PP - Polypropylene
Adhesive (unwind)	Acrylic
Liner Type (outer)	Paper (kraft)
Thickness (total)		Unknown

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	73.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	55.00 lbs/in
Elongation Percent	2.70%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.