9322 - Polyimide Tape

Ideal Tape Co. Inc.

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards

ADVANTAGES

Resists the high temperatures of molten solder
Easy removal without danger of breakage or bath contamination

APPLICATIONS

Protects gold fingers during wave soldering process

MARKETS SERVED

Electronics

COLORS

Amber

GENERAL INFORMATION

9322 is a 3.5 mil, poyimide tape engineered to protect gold fingers during the wave solder process. It resists the high temperatures of molten solder while allowing easy removal without danger of breakage or bath contamination.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Polyimide	2.00
Adhesive (unwind)	Silicone	1.50
Thickness (total)		3.50

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	20.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	65.00 lbs/in
Elongation Percent	60.00%

SECONDARY PHYSICAL PROPERTIES

Chemical Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.