488S - Aluminum Foil Tape

Ideal Tape Co. Inc.

E-Mail this datasheet

FEATURES

Std Roll Length: 50.00 yards

ADVANTAGES

Assures quick & positive grab to insulation surfaces
Conformable
Economical

APPLICATIONS

used to seal seams & joints on aluminum faced fiberglass duct board
Provides a vapor barrier
Assures integrity of the system

MARKETS SERVED

COLORS

GENERAL INFORMATION

488S has a 1.5 mil, aluminum backing with a pressure sensitive rubber adhesive used to seal seams and joints on aluminum faced fiberglass duct board. It provides a vapor ba

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Aluminum	1.50
Adhesive (unwind)	Rubber
Liner Type (outer)	Paper
Thickness (total)		Unknown

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	901.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	15.00 lbs/in
Elongation Percent	3.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.