204-3 - Skived PTFE Film Tape

DeWal Industries

E-Mail this datasheet
Request a quote

ADHESIVE TAPE FEATURES

Std Roll Length: 36.00 yards
It is UL recognized (UL File no. E179854)

ADHESIVE TAPE ADVANTAGES

High temperature silicone adhesive

ADHESIVE TAPE APPLICATIONS

Used in electrical applications such as:
Coil wraps
Separators
Transformer
Slot liners
Harness wrapping
Where good insulation and heat resistance properties are needed
Used in mechanical applications requiring high temperature resistance
Provides a low friction surface
Provides a non-stick surface

ADHESIVE TAPE MARKETS SERVED

ADHESIVE TAPE COLORS

GENERAL INFORMATION

D/W 204-3 is a 6 mil, skived PTFE film with a "high temperature" silicone adhesive. It is UL recognized (UL File no. E179854) and used in electrical applications such as coil wraps, separators, transformer, slot liners and harness wrapping where good insulation and heat resistance properties are needed. They are also used in mechanical applications requiring high temperature resistance, a low friction surface or a non-stick surface.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PTFE - Skived	3.00
Adhesive (unwind)	Silicone	3.00
Thickness (total)		6.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	40.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	18.00 lbs/in
Elongation Percent	300.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	500°F
Dielectric Strength	11000.00 volts

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.