810-2 - Victrex® Peek™ Film

DeWal Industries

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards
Extruded, virgin PEEK (polyetheretherketone) film

ADVANTAGES

Resistant to high humidity and harsh chemical environments
Good peel strength
Clean removal
Lubricious
Abrasion resistant
Free of pin holes
Best combination of friction and wear properties combined with high heat resistance
Chemical resistance

APPLICATIONS

Electrical insulation
Can be used on many different hard mating surfaces such as steel, ceramic or glass
Sliding bearings
Abrasion resistant wire wraps
Oil field equipment

MARKETS SERVED

Electrical

COLORS

GENERAL INFORMATION

810-2 is a 4 mil, extruded, virgin PEEK (polyetheretherketone) film has been surface modified on one side and coated with an acrylic adhesive. The acrylic adhesive is resistant to high humidity and harsh chemical environments while retaining good peel strength with clean removal. The surface modification enhances bond strength to other materials. Kraft paper release paper is applied to the adhesive side. The untreated side is lubricious, abrasion resistant, and free of pin holes. This tape has the best combination of friction and wear properties combined with high heat resistance, chemical resistance and electrical insulation. Tapes can be used on many different hard mating surfaces such as steel, ceramic or glass. Typical applications for the tape include sliding bearings, abrasion resistant wire wraps, and oil field equipment requiring abrasion resistance and electrical insulation.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None	2.00
Adhesive (unwind)	Acrylic	2.00
Thickness (total)		4.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	50.00 oz/in
Adhesive Removable	Yes
Adhesive Clean Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	36.00 lbs/in
Elongation Percent	165.00%

SECONDARY PHYSICAL PROPERTIES

Chemical Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	350°F
Dielectric Strength	8800.00 volts

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.