466 - Woven Glass Cloth

DeWal Industries

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards
U.L. Approval File no. E179854 Approved-Flame Retardant
Govt. Specification Mil-I-19166C Pass

ADVANTAGES

Closely woven glass fabric
High temperature silicone adhesive
Excellent abrasion resistance and high strength

APPLICATIONS

Used primarily in electrical applications
Splicing
Positioning in coils
Support rings
Reinforcing slot insulation
Armature coil insulation
Used in high temperature applications such as transformers, solenoids and appliances

MARKETS SERVED

Electrical
Appliances

COLORS

GENERAL INFORMATION

466 is a 4 mil, closely woven glass fabric and high temperature silicone adhesive. The glass fabric has excellent abrasion resistance and high strength. This tape is used primarily in electrical applications including splicing and positioning in coils and support rings, reinforcing slot insulation and armature coil insulation. It is also used in high temperature applications such as transformers, solenoids and appliances.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	Fiberglass	4.00
Adhesive (unwind)	Silicone	3.00
Thickness (total)		7.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	30.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	120.00 lbs/in

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	500°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.