423-10 - UHMW Polyethylene Tape

DeWal Industries

E-Mail this datasheet

FEATURES

Std Roll Length: 18.00 yards

ADVANTAGES

Aggressive permanent acrylic adhesive
Excellent low friction, non-stick surface
Very high tensile strength
Very tough and abrasion resistant.

APPLICATIONS

Provides an excellent low friction, non-stick surface
Used for chute liners, wear pads & guide rails in the automotive industry

MARKETS SERVED

Automotive

COLORS

GENERAL INFORMATION

423-10 is a 11.8 mil, ultra high molecular weight polyethylene film with an aggressive permanent acrylic adhesive. It provides an excellent low friction, non-stick surface. In many ways similar to PTFE. The film has a very high tensile strength and is very tough and abrasion resistant.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PE - Polyethylene	10.00
Adhesive (unwind)	Acrylic	1.80
Thickness (total)		11.80

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	50.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	60.00 lbs/in
Elongation Percent	300.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	200°F
Dielectric Strength	30000.00 volts

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.