469 - High Temperature Glass Tape

DeWal Industries

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards
Breaking strength = 120 lb/in warp
Insul. Class is H
FAA Regulation FAR - 25.855 Pass; Pratt & Whitney PMC - 4273 Approved; Rolls-Royce Aero Repair CSS13 Approved; Govt. Specification Mil-I-19166C Pass

ADVANTAGES

APPLICATIONS

Applications include:
Slot and coil insulation
Heat barrier tape
Harness wrap
Cable splicing

MARKETS SERVED

COLORS

GENERAL INFORMATION

469 is a 7 mil close woven glass tape. It is used as a very high temperature (500°F) insulation tape. Applications include slot and coil insulation, heat barrier tape, harness wrap and cable splicing.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PTFE - Oriented	4.00
Adhesive (unwind)	Silicone	3.00
Thickness (total)		7.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	38.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	120.00 lbs/in

SECONDARY PHYSICAL PROPERTIES

Water Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	500°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.