403-3 - UHMW Polyethylene Tape

DeWal Industries

E-Mail this datasheet
Request a quote

ADHESIVE TAPE FEATURES

Std Roll Length: 18.00 yards

ADHESIVE TAPE ADVANTAGES

Aggressive elastomeric adhesive
Excellent low friction film
Very high tensile strength
Very tough
Abrasion resistant

ADHESIVE TAPE APPLICATIONS

Provides an excellent low friction, non-stick surface
Used in mechanical applications such as chute liners, wear pads and guide rails.

ADHESIVE TAPE MARKETS SERVED

ADHESIVE TAPE COLORS

GENERAL INFORMATION

403-3 is a 8.3mil, ultra high molecular weight polyethylene film backing with an aggressive elastomeric adhesive. The UHMW film provides an excellent low friction film provides an excellent low friction, non-stick surface, in many ways similar to PTFE. The film has a very high tensile strength and is very tough and abrasion resistant. This tapes is used primarily in mechanical applications such as chute liners, wear pads and guide rails.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PE - Polyethylene	3.00
Adhesive (unwind)	Elastomeric	5.30
Thickness (total)		8.30

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	90.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	18.00 lbs/in
Elongation Percent	300.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	200°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.