403-5 - UHMW Polyethylene Tape

DeWal Industries

E-Mail this datasheet

FEATURES

Std Roll Length: 18.00 yards
Breaking strength = 30 #/in

ADVANTAGES

Extremely rugged film
Highly abrasion resistant
Broad chemical compatability
Very low coefficient of friction

APPLICATIONS

Excellent for non-stick, wear surface areas such as chute liners, packaging equipment slides
Industrial applications
Automotive applications
Used on work surfaces in laboratory
Used on food preparation areas

MARKETS SERVED

Packaging
Industrial
Automotive
Laboratories
Food preparations

COLORS

GENERAL INFORMATION

403-5 is a 10.3 mil UHMW polyethylene film with an elastomer rubber based adhesive is an extremely rugged film that is highly abrasion resistant, has broad chemical compatability and very low coefficient of friction. The tape of choice for non-stick, wear surface areas such as chute liners, packaging equipment slides and many industrial and automotive applications. Used on work surfaces in laboratory and food preparation areas, an extremely versatile tape for use in non-temperature sensitive applications.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PE - Polyethylene	5.00
Adhesive (unwind)	Elastomeric	5.30
Thickness (total)		10.30

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	90.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	18.00 lbs/in
Elongation Percent	300.00%
Testing Info: Adhesion ASTM-D 1000 ; Tensile Strength ASTM-D 3759; Elongation ASTM-D 3759

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	200°F
Dielectric Strength	15000.00 volts

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.