750-5 - UHMW Polyethylene Tape

DeWal Industries

E-Mail this datasheet
Request a quote

ADHESIVE TAPE FEATURES

Std Roll Length: 18.00 yards

ADHESIVE TAPE ADVANTAGES

Aggressive, acrylic adhesive system
Excellent low friction
Excellent non-stick surface
Similar to PTFE
Very high tensile strength
Very tough and abrasion resistant

ADHESIVE TAPE APPLICATIONS

Provides an excellent low friction, non-stick surface
Used primarily for automotive applications such as anti-squeak and sound deadening
Used in various mechanical applications such as chute liners, wear pads and guide rails

ADHESIVE TAPE MARKETS SERVED

ADHESIVE TAPE COLORS

GENERAL INFORMATION

750-5 is a 6.8 mil, Ultra High Molecular Weight (UHMW) polyethylene that is coated with an aggressive, acrylic adhesive system. The UHMW film provides an excellent low friction, non-stick surface, in many ways similar to PTFE. The UHMW film has a very high tensile strength that is very tough and abrasion resistant. It is used primarily for automotive applications such as anti-squeak and sound deadening. They are also used in various mechanical applications such as chute liners, wear pads and guide rails.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PE - Polyethylene	5.00
Adhesive (unwind)	Acrylic	1.80
Thickness (total)		6.80

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	50.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	30.00 lbs/in
Elongation Percent	300.00%

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	200°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.