204-10 - Skived PTFE Tape

DeWal Industries

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards
UL approved Flame Retardant / Cold Resistant

ADVANTAGES

High temperature PTFE where good insulation and heat resistance properties are required

APPLICATIONS

Used in electrical applications such as coil wraps, separators, transformers, slot liner and harness wrapping
Mechanical applications requiring high temperature resistance, a low friction surface or a non-stick surface

MARKETS SERVED

Electrical

COLORS

GENERAL INFORMATION

204-10 is a skived PTFE film coated with a "high temperature" silicone adhesive. It is used in electrical applications such as coil wraps, separators, transformers, slot liner and harness wrapping where good insulation and heat resistance properties are required. They are also used in mechanical applications requiring high temperature resistance, a low friction surface or a non-stick surface.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PTFE - Skived	10.00
Adhesive (unwind)	Silicone	3.00
Thickness (total)		13.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	55.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	60.00 lbs/in
Elongation Percent	300.00%
Testing Info: Adhesion ASTM-D 1000;Tensile Strength ASTM-D 3759; Elongation ASTM-D 3759 Dielectric Strength (Volts) ASTM-D 149 20000 Max. Operating Temp. (F)

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	40°F
Minimum Service Temperature	0°F
Maximum Short-Term Temperature	500°F
Dielectric Strength	20000.00 volts

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.