MS3032SL - Single Linered Adhesive Transfer

Avery Dennison

E-Mail this datasheet

FEATURES

Std Roll Length: 250.00 yards
Unsupported specially formulated acrylic adhesive
Adhesive protected by a moisture stable polycoated liner
180° peel to polypropylene = 56 oz/in, to polyester = 69 oz/in & to polycarbonate = 86 oz/in
Static shear: 1000 grams at 72° upon a .5" square area>10,000 minutes to failure
Surface resistivity: ASTM D 257; 7.3 E 12 ohms square

ADVANTAGES

Good adhesion to high surface energy plastics and metals
Excellent shear strength
Chemical and UV resistance
Stable performance over time
Ease of die-cutting and liner removal
Moisture stable liner provides layflat for easy processing

APPLICATIONS

Specially designed for use on membrance touch switch assemblies and graphic overlays

MARKETS SERVED

Membrane switches
Graphics

COLORS

GENERAL INFORMATION

MS3032SL is a 2.0 mil, single linered adhesive transfer. It is primarily used for membrane touch switch assemblies and graphic overlays. Specification #56520

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic	2.00
Liner Type (outer)	Paper (4.2 mil, 58# poly-coated kraft)
Thickness (total)		2.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	74.00 oz/in	74.00 oz/in
Adhesive Activation	Pressure
Testing Info: Dielectric strength; ASTM-D-149

SECONDARY PHYSICAL PROPERTIES

Water Resistant	Yes
UV Resistant	Yes
Chemical Resistant	Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	300°F
Maximum Short-Term Temperature	400°F
Dielectric Strength	1250.00 volts

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.