1150 - High Temperature Acrylic Transfer

Avery Dennison

E-Mail this datasheet

FEATURES

Std Roll Length: 250.00 yards
Specially formulated acrylic adhesive
Densified kraft release liner
Static Shear: 5.5 lbs. at 72°F upon a 1" square area>10,000 minutes to failure

ADVANTAGES

Bonds to a variety of substrates
Elevated temperature, solvent and UV resistance
Excellent die cutting and liner removal characteristics

APPLICATIONS

Designed for the permanent mounting of foil, metal and plastic nameplates and decorative trim. It is particularly useful for the application of metal nameplates where conformability is required.
ABS plastic
Aluminum-anodized
Foam-polyester urethane
Ceramic
Metal
PVC-mildly plasticized
Stainless

MARKETS SERVED

Foil
Plastics
Sign
Metals
Trophy
Industrial

COLORS

GENERAL INFORMATION

FT 1150 is a 2.0 mil, high temperature acrylic transfer. It is primarily used for the permanent mounting of foil, metal and plastic nameplates and decorative trim. It is particularly useful for the application of their metal nameplates where conformability is required. Specification #56486

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic	2.00
Liner Type (outer)	Paper (4.3 mil, 80# supet tuff)
Thickness (total)		2.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	60.00 oz/in	60.00 oz/in
Adhesion Loop Tack	80.00	80.00
Adhesive Activation	Pressure

SECONDARY PHYSICAL PROPERTIES

Solvent Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	225°F
Maximum Short-Term Temperature	275°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.