|
|
FEATURES
- Std Roll Length: 250.00 yards
- Very aggressive acrylic adhesive
- Low fogging qualities
- Moisture stable staflat liner
- Thick transfer tape construction
- 180° peel to ABS & polypropylene = 136 oz/in
- Fogging = fog number>90
- Static Shear: 1000 grams at 72° upon a .25" square area>10,000 minutes to failure
ADVANTAGES
- High adhesion to low surface energy plastics
- High initial tack
- Meets OEM fogging specifications
- Excellent bond to foams and fabrics
APPLICATIONS
- Designed for applications requiring high adhesion to low surface energy materials or bonding to foams and fabric where low-fogging is required.
MARKETS SERVED
- Automotive
- Foams
- Textiles
- Industrial
COLORS
|
 |
GENERAL INFORMATION
| FT 1149 is a 5.0 mil, aggressive, low fogging acrylic transfer. It is primarily used for applications requiring high adhesion to low surface energy materials or bonding to foams and fabric where low-fogging is required. Specification #56493 |
|
| PRODUCT CONSTRUCTION |
| |
Type |
Mil Thickness |
|
 |
| Backing |
None |
|
| Adhesive (unwind) |
Acrylic |
4.50 |
| Liner Type (outer) |
Paper (84# natural staflat) |
|
| Thickness (total) |
|
4.50 |
|
|
| PRIMARY PHYSICAL PROPERTIES |
| |
Unwind Side |
|
Liner Side |
|
|
| Adhesion-to-Steel - 180° Peel |
132.00 oz/in |
|
132.00 oz/in |
| Adhesion Loop Tack |
192.00 |
|
192.00 |
| Adhesive Activation |
Pressure |
|
|
Testing Info: PSTC-33, ASTM D-1000, TAPPI T-411-M-44, FASSON TM-2, PSTC-3, ASTM D-3330, STD-10, PSTC-7, Federal Test Method 147B, STD-9 |
|
|
| SECONDARY PHYSICAL
PROPERTIES |
|
|
|
| THERMAL / ELECTRICAL
PROPERTIES |
| Minimum Application Temperature |
50°F |
| Minimum Service Temperature |
0°F |
| Maximum Long-Term Temperature |
200°F |
| Maximum Short-Term Temperature |
250°F |
|
|
|
|
| |
- The physical properties listed are typical values and are not to
be considered as specifications. Our suggestions for use are based
on
tests we believe to be reliable. However, the purchaser must carry
out their own tests to determine the suitability of the product for
their internal use. Information is given in good faith, but without
warranty.
- It is essential, as with all pressure-sensitive tapes, that the surface
to which the tape is applied be clean, dry and free of grease and oil.
- Shelf life from date of manufacture is based on the product being
stored at 70°F(21°C) / 50% relative humidity out of direct
sunlight.
- Specification compliance is dynamic and should only be used as a general
guide. Always confirm that the tape you are interested in currently complies
with all specification requirements. Please verify that the product number
that you select is available in the proper size and color to meet your
specification.
|
 
|
|