1148 - Aggressive Acrylic Transfer Tape

Avery Dennison

E-Mail this datasheet

FEATURES

Std Roll Length: 250.00 yards
Speically formulated acrylic adhesive
Densified kraft release liner
Static Shear: 2.2 lbs. at 72° upon .25" squared area>10 minutes to failure

ADVANTAGES

Designed to provide excellent adhesion to low surface energy substrates
80# liner provided good die cutting characteristics

APPLICATIONS

FT 1148 features aggressive tack and adhesion properties and is suitable for lamination to a variety of difficult to bond to substrates
ABS plastic
Aluminum-anodized
Cloth
EPDM
Foam-polyester urethane
Foam polyethylene
Foam-polystyrene
Ceramic
Metal
Neoprane
Polycarbonate (lexan®)
PVC-mildly plasticized
Rubber-extruded
Stainless

MARKETS SERVED

COLORS

GENERAL INFORMATION

FT 1148 is a 5.0 mil, aggressive acrylic transfer tape. It features aggressive tack and adhesion properties and is used for lamination to a variety of difficult to bond to substrates. Specification #56112

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	None
Adhesive (unwind)	Acrylic	5.00
Liner Type (outer)	Paper (80# super tuff)
Thickness (total)		5.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	110.00 oz/in	110.00 oz/in
Adhesion Loop Tack	70.00	70.00
Adhesive Activation	Pressure

SECONDARY PHYSICAL PROPERTIES

Solvent Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	50°F
Minimum Service Temperature	0°F
Maximum Long-Term Temperature	120°F
Maximum Short-Term Temperature	175°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.